Wall painting is one of the most practical solutions you can use to make a difference in the interior or exterior appearance of the house.
Residential painting is quite difficult, requiring know-how and, above all, experience to ensure a high-quality finish.
Often, resorting to a professional painter is the best decision to guarantee a better result, save time, and, above all, ensure the durability of the paint job.
However, if you are an agile handyman, you can save a few dollars by going the DIY painting route.
With this in mind, it is important to be well informed about the different procedures that must be followed for a successful paint job.
But also, avoid falling into rookie mistakes, which can waste all the work, spoil the quality of the finish and jeopardize the duration of the painting.
Whether you’re doing interior or exterior painting, preparation of the surface is a crucial step that will have a significant impact on the quality of the finish and the durability of the paint applied.
The surface must be clean, free of all deposits of dust, dirt, and grease so that the paint can adhere better.
Also, make sure the substrate is in perfect condition, that it does not show any plaster peeling, cracks, or moisture problems.
No matter how many coats you apply to the walls, painting is not a good solution for hiding imperfections.
In turn, small flaws will have an impact on the quality of the paint finish.
Finally, plan a stripping if you notice chipping problems on the old paint.
If you try to paint on these anyway, first the finish will be worse, and second, the problem may resurface in just a few years or even months.
Not to mention the fact that the paint can easily peel off since the surface itself is no longer adherent.
These preparation tasks take a lot of time and patience that many DIY painters are mistakenly tempted to skip.
If you neglect even one of these steps, you can quickly notice anomalies in the adhesion and, therefore, the longevity of the paint.
Instead, you can choose to hire a professional painting company that will do all the legwork for you.
Also, you ensure a much better result within a short time.
Hoping to save on the budget, DIY painters tend to find inexpensive solutions in terms of paint supplies, including the paint.
What you don’t know is that you may need to apply one or two additional coats before obtaining the same finishing result as with high-quality paint.
In addition, the paint may be less adherent, flakes easily, and therefore needs to be repainted sooner.
These products may seem affordable in the short term, but in the end, you may find that you would have been better off going with professional-grade paint.
It can be quite frustrating to notice that you underestimated the paint required while in the middle of a project.
You will be forced to interrupt the work, waste time, not to mention the costs associated with travel to the supplier.
Even more, you risk leaving uneven traces on the walls, highlighting the beginning and end of different paint coats.
If you’re attempting DIY interior painting, watch out for the above costly mistakes, and your job should turn out great.
However, if you don’t have the skills, experience, and the right tools required for interior painting, consider hiring a professional painting contractor.
If you haven’t identified a painting contractor in Tigard, Oregon yet, Maller Painting Co. would like to be your favorite painter.
We have years of residential painting experience serving the areas of Beaverton, Sherwood, and Tigard, Oregon.
Kevin began painting houses with his father’s company, C&K Painting, in 1996. His father taught him how to use a brush, roller, and caulk and clean a brush properly. He then worked for several other paint companies, where he learned how to spray oils, lacquers, and all water-based finishes. In 2012, after 15 years of experience, he decided to get licensed and start the Maller Painting Company. His team has focused on providing the best re-painting services to our residential clients in the Beaverton area.